Daftar Peralatan Praktik Pada Area Kerja Mesin Bubut

1. Bench Lathe Machine 1 Meter

 

Untuk membubut benda kerja dari logam sesuai dengan yang diinginkan  dengan panjang maksimal 1 meter.
Spesifikasi:
- Swing over bed mm approx. Ø355,
- Swing over carriage mm approx. Ø220,
- Swing over gap mm appox. Ø500,
- Width of bed-way mm approx. 186,
- Distance between centers mm 1000,
- Taper of spindle M.T.5,
- Spindle diameter mm approx. Ø38,
- Range of speed rpm 70~2000.
- Standard accessories: Three jaw chuck, Four jaw chuck, Steady rest, Follow rest, Working light, Coolant system, Foot brake, Tools and tool box.

2. CNC Lathe Machine

Untuk membubut benda kerja memakai program komputer CNC-controlled Flat Bed Lathe Machine.
Spesifikasi:
- Bed Type : Flat Bed;
- Max. Swing over Bed : Ø 360 mm;
- Distance Between
- Centers : approx. 1000 mm;
- Swing over Cross Slide : approx. Ø 210 mm;
- Spindle Bore : Ø approx. 60 mm;
- Bed Width : approx. 330 mm;
- Spindle Taper: MT6;
- Spindle Speed : 150 2000 RPM;
- Max. Travel of X-Axis : 210 mm,
- Max. Travel of Z-Axis : 1000 mm;
- Tailstock Taper : MT4
- Main Motor : approx. 5500W;
- Standard Accessory : 3-Jaw Chuck, Coolant System, Tools and Tool-box

3. CNC Lathe Trainer

 
Pelatihan penggunaan mesin bubut CNC sama seperti aslinya, dan hasilnya dapat diaplikasikan secara langsung. 

Spesifikasi:
- Chuck Size approx. 100 mm (Dia)
- Chuck Type Hydraulic / Manual Hyd- raulic
- Maximum Turning Diameter / Length  40 mm / 250 mm
- Center Height approx. 100 mm
- Swing Over Bed approx. 200
- Distance between
- Centre approx. 320 mm
- Controller with Cut Viewer
- Control System PLC Based Control
- System Positioning / Resolution ap- prox. 0.005 mm / 0.001 mm
- Repeatability approx. +/- 0.010 mm
- Spindle Motor Capacity 2 HP / ap- prox. 3 HP
- Spindle RPM 100 - 4000 RPM with VFD
- Spindle Nose Taper A 2-3 / MT 3
- C Axis (Optional) C Axis with Brake
- Axis Motor and Drive
- Servo Motor with
- Servo Drives
- Axis Travel (X / Z) approx. 120 mm / 280 mm
- Programmable Feed Rate 0 - 10,000 mm/min
- Turret Type Automatic (4 Station / 8 Station)
- Tailstock Base Stroke approx. 170 mm
- Tailstock Actuation Hydraulic/ Manu- al Lubrication / Coolant Automatic
- FMS Compatibility Provided

4. Slant Bed CNC Lathe Machine

Untuk membubut benda kerja menggunakan mesin bubut yang dikontrol memakai program berbasis komputer.
Spesifikasi:
- Bed type : Slant Bed
- Swing over bed : approx. Ø 440 mm
- Swing over Cross Slide : approx. Ø 340 mm
- Max workpiece dia : approx. Ø 270 mm
- Distance Between Centers : approx. 480 mm
- Max Travel of X-Axis: 150 mm
- Max Travel of Z-Axis : 500 mm
- Spindle bore : approx. Ø 58 mm
- Spindle Speed : approx. 50-4300 RPM
- Turret : NC turret
- Rapid traverse X : approx. 24 m/min
- Rapid traverse Z : approx. 29 m/min
- Feedrate : approx. 0,001 - 1.000 mm/ rev
- Main Motor : approx. 5.5 KW
- Tailstock Taper : MT 3/ MT 4/ MT 5
- Number of tool in turret : min. 8 pcs
Features:
- Monitoring maintenance schedule;
- Real time 3D cutting simulation;
- Machinning parameters calculator;
- Handwriting screen memo;
- Full Cover Protection;
- Additional Spare M code 4 set (example for: anti fire system, measuring holding time, etc.) - Standard accessories: 3 Jaws chuck, Worklight, Coolant System, Auto lubrica- tion system, Tools and Tool-box.